Release Agents for the Rubber Industry
Supported Rubber Materials
- Ethylene Propylene Diene monomer ( EPDM )
- FKM and other fluoroelastomers (Viton ®, Aflas ®)
- Silicone rubber, nitrile, BUNA, and natural rubbers, Isoprene
- HNBR, Butyl, polychloroprene, SBR, Neoprene
- Peroxide- and sulfur-cured rubbers
- EVA / PEVA
- Styrene butadiene rubber (SBR)
- ECO, CPE, re-vulcanized crumb rubber, and more
Supported Processes
- Compression molding
- Rubber to metal bonding
- Injection molding
- Extrusion
- Transfer molding
- Tire manufacturing
- Hose manufacturing (mandrel-built rubber parts)
- Re-bonded crumb rubber
- Rubber shoe outsoles
Featured Rubber Mold Release Agents
| Product | Base | Type | Description | Recommended for |
|---|---|---|---|---|
|
McLube® 860
|
Water
|
Heat-cured
|
Semi-permanent, durable, non-transferring, PFAS-free
|
FKM, EPDM, HNBR, nitrile, neoprene, and peroxide-cured
|
|
McLube® 1711L
|
Solvent
|
Instant Cure
|
Semi-permanent, non-transferring, silicone-free.
|
General molding and silicone rubbers
|
|
McLube® 1725L
|
Solvent
|
Instant Cure
|
Semi-permanent, non-transferring
|
EPDM, SBR, nitrile, natural; injection molding, composite applications
|
|
McLube® 1805
|
Solvent
|
Heat-cured
|
Multiple releases per application, PFAS-free
|
General rubber molding, peroxide-cured compounds
|
|
McLube® 1901
|
Water
|
Conventional
|
PFAS-free, silicone-free, multiple releases
|
General rubber molding, silicone rubber
|
|
McLube® 1903
|
Water
|
Conventional
|
PFAS-free, silicone-free
|
General rubber molding, silicone rubber
|
|
McLube® 3030
|
Water
|
Heat-cured
|
Semi-permanent, PFAS-free, extended shelf-life
|
FKM, EPDM, HNBR, nitrile, neoprene, and peroxide-cured
|
* This is a list of featured products only. All McLube® products for rubber molding applications are not listed on this page. If you do not see the McLube® product you currently use listed above, this does not mean it has been discontinued. Contact Us to inquire about a product that is not listed above.
